19. (1B, 48)H (27, 72)D, (9B, C8)H (155, 200)DThis code terminates double-strike mode.20.(1B, 58, n)H (27, 88, n)D, (98, D8, n)H (155, 216, n)DThis code selects high quality (correspondence) print mode.n = (01)H or (31)H Selects high quality print mode.n = (00)H or (30)H Terminates high quality print modeThis code is valid only in standard pica and standard elite print modes.21. (1B, 78, n)H (27,120,n)DThis code selects correspondence quality print (n = 1) or draft print (n = 0).22. (1B, 34)H (27, 52)D, (9B, B4)H (155, 180)DThis code selects italic print mode.23. (1B, 35)H (27, 53)D, (9B, B5)H (155, 181)DThis code terminates italic print mode.24.(1B,36)H (27,54)D (IBM mode only)

In the IBM Graphics Printer mode, this command selects the IBM Graphics Printer character set 2 which includes characters not contained in character set 1.

25.(1B,37)H (27,55)D (IBM mode only)

In the IBM Graphics Printer mode, this command selects the IBM Graphics Printer character set 1.

Double-Width Character Printing Commands

26.(0E)H (14)D, (8E)H (142)D

This code selects double-width print mode. This command is only valid for a single line of printing. If more than a single line worth of print data is input, the automatic printing function prints the data. However, after the line-feed is performed, the double- width print mode is terminated.

This command is terminated by a linefeed,

or

code

27. (1B, 0E)H (27, 14)D, (9B, 8E)H (155, 142)DSame as the code.

41