(1B, 6C, n)H (27,108, n)D, (9B, EC, n)H (155, 236, n)DThis code sets the left margin, The n selects the column with the present character width as the base. This code is ignored if the value of n exceeds a single line. This code clears the print data input already and the horizontal tabs..
If the left and right margins overlap, the one input first is considered validPage Length Setting Commands
The length of the page atThe following two codes, 40 and 41, are valid only when the FORM switch is set to ”0”,
40.(1B, 43, n)H (27, 67, n)D, (9B, C3, n)H (155, 195, n)D1 n [ 127. If n [ 128, this is ignored.This code selects the page length in line units. The n is the line number. The length of a page is set by multiplying n by the present
The paper position at the time this command is performed becomes the head of the first page. The page length will not change even if a
1[ n [ 22. When n m 23 or n = 0, this is ignored. This code sets the page length in inches. The n is the number of inches,
Vertical Tab Commands
42.
(1B, 42, n1, n2, .... nk, 00)H (27, 66, n1,n2, .... nk, 0)D, (9B, C2, n1, n2, .... nk, 00)H (155, 194, n1, n2, .... nk, 00)D
This code sets the vertical tab positions. The n selects the number of lines. The vertical tab is positioned by multiplying the present single
| first. The code sequence ends with the | code. | |
| A vertical tab is also automatically set at the head of the page | ||
43. | (1B, 62, m, n1, n2, .... nk, 00)H (27, 98, | |
m, n1, n2, .... nk, 0)D, (9B, E2, m, n1, n2, .... nk, 00)H (155, 226, m, n1, n2,
.... nk, 0)D0 [ m [ 7. This code sequence set the vertical tabs per channel. The m specifies the
channel. When m = 0, this code becomes the same as the 
code. The method of setting is the same as is done with 
45