44. (1B, 2F, m)H (27, 47, m)D, (9B, AF, m)H (155, 175, m)D

0 [ m [ 7. This code selects the vertical tab channel. When m = 0, the vertical tabs

set byare used. The

code is used to move to the vertical tab positions.

Line-Feed Value Setting Commands

45. (1B, 30)H (27, 48)D, (9B, B0)H (155, 176)DThis code sets the line-feed pitch to 1/8 inch.46. (1B, 31)H (27, 49)D, (9B, B1)H (155, 177)DThis code sets the line-feed pitch to 7/60 inch.47. (1B, 33)H (27, 50)D

In the IBM Graphics Printer mode, this command sets the line spacing to the spac-

ing selected with the command. If the command has not been used, this command sets the line spacing to 1/6 inch.

48. (1B, 33, n)H (27, 51, n)D, (9B, B3, n)H (155, 179, n)DThis code sets the line-feed pitch to n/180 inch.49. (1B, 41, n)H (27, 46, n)D

In the IBM Graphics Printer mode, this command only defines a line spacing of n/60

inch. This command must be followed by the command to actually set the selected line spacing.

In the Epson Printer mode, this command sets the line spacing to n/60 inch.50. (1B, 2E)H (27, 46, n)D

This code sets the line spacing for subsequent line feed commands to n/120 inch.

Underline Commands

51.(1B, 2D, n)H (27, 45, n)D, (9B, AD, n)H (155, 173, n)DThis code performs the setting and termination of underlining.
n = (01)H or (31)HSets underline.
n = (00)H or (30)H

Termination of underline.

An underline is not output when the printing position is moved due to a tab. The underline is printed in 9th vertical dot position.

46