120 Solving Problems
If nothing is projected after the drivers are installed, do one of the
following:
Windows: Select or Start > All Programs or Programs >
EPSON Projector > EPSON USB Display > EPSON USB
Display Vx.x.
Mac OS: Click the USB Display icon in the Dock. If you don’t
see it, open the USB Display folder in the Applications folder
and run USB Display.
Make sure USB Type B in the Extended menu is set to USB
Display (see page 72).
In Windows, if the mouse pointer flickers, select All Programs or
Programs > EPSON Projector > EPSON USB Display >
EPSON USB Display Vx.x., then clear the Transfer layered
window checkbox.
With Windows DirectX, turn off DirectX functions.
If you are using Windows Media Center, make sure you use
window display mode, rather than full-screen display mode.
If the image is choppy, make sure you are using a USB 2.0
interface on your computer.
Solving Problems With the Image or Sound

No image appears on the screen.

Check that the Ppower light is green and not flashing. Also press
the A/V Mute button on the remote control to make sure the
picture has not been turned off temporarily.
The projector may be in standby or sleep mode. If the Ppower
light is orange, press the Ppower button to turn the projector on.
If the power was switched off and then on again, the projector
may be cooling down. Wait until the Ppower light stops flashing
and remains orange; then press the Ppower button again.