Presenting With the Remote Control 57
4. Select one of the patterns shown on page56, or choose Test
Pattern. If you want to create your own pattern, choose User
Pattern. See below for more information.
5. Press Enter to select the pattern you want, then press Esc.
6. Choose Pattern Display to display the pattern.
7. Press Esc when you’re finished displaying the pattern.
Assigning a Pattern to the User Button
You can assign any of the available patterns to the User button on the
remote control, and then display it by simply pressing the User
button.
1. In the Settings menu, select the Pattern Type as described on
page 56.
2. Highlight User Button and press Enter.
3. Highlight Pattern Display and press Enter.
4. Press Menu to exit.
Creating Your Own Pattern
You can transfer any image from your computer or video source to the
projector and then use it as a pattern. If you assign it to the User
button as described above, you can display it any time you want by
simply pressing the User button on the remote control.
Start by displaying the image you want to use from a computer or
other source. Then follow these steps to capture the image and transfer
it to the projector:
1. In the Settings menu, highlight Pattern and press Enter.
2. Select User Pattern and press Enter.
3. When you see a message asking if you want to use the current
image as the pattern, select Yes and press Enter.
4. Press Enter again.
note
When you choose an image
f
or the user pattern, it erases
any previously used image.