Presenting With the Remote Control 61
If you are not connected to another image source, the Slideshow
program appears automatically.
Files for images that have been scanned or modified will display
an icon, rather than a thumbnail image.
If necessary, press the arrow buttons on the remote control to
highlight the device you want to present from, then press the
Enter button.
3. If you need to select a subfolder on your device, press the arrow
buttons to highlight the folder and press Enter.
4. To display an individual image, press the arrow buttons to
highlight it and press Enter. To display additional image files,
press the l or r arrow button.
5. To display a slideshow of all the images in the current folder, use
the arrow buttons to highlight Slideshow on the bottom of the
Slideshow screen and press Enter. The images display sequentially
one time through. At the end, you see the folder display again.
Select the following as necessary to control your display or slideshow:
To move back up a folder level, highlight Back to Top at the top
of the Slideshow screen and press Enter.
To select a different device, highlight Select drive in the upper
right corner of the screen, press Enter, and select the device.
note
To rotate a displayed image,
press the u or d button on
the remote control until it is
displayed correctly.
note
To display a slideshow from
a folder that is not open,
highlight the folder and press
the Esc button on the
remote control. Then select
Slideshow from the menu
that appears and press
Enter.
To begin a slideshow from a
particular image, use the
arrow buttons to highlight
that image, press Enter,
then press Enter again.