130 Solving Problems

The pen position is not accurate.

■If you use the E-Zoom + button on the remote control to enlarge
the image, the pen position will not be accurate. When you return
to the original size, the pen position should be correct.
■You may need to recalibrate (see page49).
■Make sure the cable cover is in place to keep cables from blocking
the signal.

You’re having trouble calibrating.

■If the flashing circles don’t appear, make sure the VGA cable and
USB cable are securely connected to the computer. Try restarting
the Easy Interactive Driver, as described on page 128.
■If the circles don’t stop flashing and turn black (or they stop
flashing and turn black automatically), dim or turn off any bright
lights near the projection surface.
Solving Password Problems
If you cannot enter or remember a password, try the following
solutions:
■You may have turned on password protection without first setting
a password. Try entering 0000 using the remote control.
■If you have entered an incorrect password too many times and see
a message displaying a request code, write down the code and
contact Epson as described on page 134.
Solving Network Problems

You can’t display an image using Quick Wireless

Connection.

You may need to restart your computer to connect.