P-5000 User’s Guide

3. Set the date and time using the 4-way ring.

Date and Time

 

Set current Date and Time.

 

Year

Month

Day

Hour

Minute

2006

12

12

12

00

 

Date Format

 

 

 

MM/DD/YYYY

 

Complete

 

4.After you finish all settings, select Complete using the Right or Left key, then press the OK key.

Note:

❏If approximately 24 hours passes after battery power is cut, the date and time settings may be lost, and will need to be set again.

❏If the date and time settings are erased, the Date and Time screen is displayed when you turn on the viewer next time.

❏After changing the battery, make sure that the date and time is set correctly. If necessary, set the date and time again.

❏You can change the settings later. For details, see “Changing the Viewer Settings” (page 53).

Turning the power off

1.Make sure that the Access lamp is off.

2.Slide the power switch to as shown below and hold it down for several seconds until the shut down display appears. The power switch will return to the original position.

Hold

Illumination lamp

Getting Started 12