P-5000 User’s Guide

Copying Data from USB Devices

You can copy data from USB devices directly using the USB Standard-A connector of the viewer. Only a USB device supporting the USB Mass Storage specification can be used. You can use the following USB storage devices capable of copying: digital cameras, external HDD drives, USB memories, and card reader/writers. You can also use the following Epson Multimedia Storage Viewers: P-2000, P-4000, P-2500, P-4500, and P-3000.

Connecting a USB device

1.Connect the AC adapter to the viewer if possible.

Note:

Some USB devices require the viewer to be powered via the AC adapter.

2.Connect the viewer and the USB device. Open the side upper cover and connect a USB cable to the Host (Standard-A) connector and the other end to the USB device, or connect a USB memory to the viewer.

3.Turn on the viewer and the USB device.

Note:

❏If the USB device has a supplied AC power cord, plug it in also, to prevent data loss while transferring.

❏Using a USB hub is not supported.

❏A USB device without power may not be activated.

❏A USB device with the certification or encryption function cannot be used.

❏When you connect a USB device to this viewer, use the USB cable supplied with the device.

❏Do not connect USB interfaces (Host-standard A and Slave-Mini B) at the same time. It may cause a malfunction.

❏Do not touch the Slave-Mini B connector during the USB data transfer.

Transferring Data 23