P-5000 User’s Guide

2.Insert the battery into the compartment in the direction of the arrow on the battery sticker.

Insert the battery until it clicks and locks in place.

3. Close the battery cover and slide it to the left until it clicks.

Charging the battery

After installing the battery, connect the AC adapter. The installed battery will be automatically charged.

1.Make sure that the battery is installed.

c Caution:

Do not connect the AC adapter when the battery is not installed. Doing so may cause the viewer to be damaged.

2.Connect the AC adapter as shown below, then plug the other end into a power outlet.

Charge lamp

Maintenance and Troubleshooting 62