2.Connect the main cable. The main cable connects the PS/2 mouse cable (needed to use the remote control as a mouse) and 9-pin serial cable (needed to use the ELP Link II software and the Effects buttons on the remote control) to the projector.

PS/2 mouse cable

9-pin serial cable

main cable

a.Connect the small end of the main cable to the projector’s Mouse/Com 1 port. (Use the Mouse/Com 2 port if you are connecting a second computer.)

b.Connect one end of the PS/2 mouse cable included with the projector to the mouse terminal on the square end of the main cable.

Connecting to a Computer

13