The Video menu enables you to make adjustments to the projected image. The following options are available when the image source is Video.
Note: The video source (such as a VCR or camcorder) must be connected and operating, and the image source on the projector must be set to Video for you to access these menu options.
Menu item | Description |
|
|
Brightness | Lightens or darkens the overall image. Increase brightness to lighten |
| an image, or decrease it to darken the image. |
Contrast | Adjusts the degree of difference between light and dark areas. |
| Increase the contrast to make light areas lighter and dark areas |
| darker. Decrease it to minimize the difference between the lightest |
| and darkest areas of the image. |
Saturation | Adjusts color density. Increase the setting for darker and more |
| opaque colors. Decrease it for lighter and less opaque colors. |
Tint | Adjusts the |
(NTSC only) | more green, or decrease it to add more red. |
Mode | Specifies the video signal system. Normally this signal system setting |
| should be left at AUTO to automatically detect the type of video |
| signal. If automatic selection is not possible for some reason, use this |
| menu to manually specify NTSC, PAL, or SECAM. |
|
|
50 | 3 • Using the Projector Menus |