Option Tab
Option | Description |
|
|
| |
Blank To | Specifies if a blank screen is to be displayed when no signal is | |
| connected. |
|
Source | Temporarily displays a prompt on the projector screen identifying | |
Prompt | which source (computer or video) is providing the image. | |
Install | Specifies how the projector is being used: | |
| Rear Proj | Use this setting when projecting to the back of a screen |
|
| so the image is flipped left to right. |
| Ceiling Mount | Use this setting when the projector is installed on the |
|
| ceiling so the image is flipped top to bottom. |
View Change Specifies how the screen should disappear when changing the image source:
| Diagonally | Images disappear and appear from the top left of the |
|
| screen to the bottom right. |
| Left to Right | Images disappear and appear from the left to the right. |
| Fade In | Images appear from the center of the screen and |
|
| disappear to the center. |
Lamp Life | Displays the number of hours the lamp has been used. | |
Pattern | Displays the test pattern currently selected. | |
Display |
|
|
Reset | Resets all fields to their default values. | |
|
|
|
76 | 4 • Using the ELP Link II Software |