Installing the Software from Windows 95
Perform the following steps to set up the software:
1.Insert the Link II for Windows installation diskette into a diskette drive (A: or B: as appropriate).
2.Click Start.
3.Click the Run menu option. The Run dialog box appears:
4.Type A:\SETUP (or B:\SETUP as appropriate), then press Enter or click OK. The ELP Link II introduction appears. Press C to continue.
5.To accept the default location for where the software should be installed, press C to continue. Otherwise, enter a new directory name and then press C.
6.The Link II software communicates with the projector using the computer’s serial communication (COM) port. Specify which COM port to use, then press C to continue. (Most likely, your computer is using COM 1.)
62 | 4 • Using the ELP Link II Software |