✦Warning: Let the lamp cool before replacing it. Also, do not touch the glass portion of the lamp assembly; this can cause premature lamp failure.
1.Turn off the projector and unplug the power cord from the electrical outlet and the projector. Wait at least 20 minutes for the bulb to cool.
2.Place the projector on its side with the handle at the top so you can easily access the lamp cover.
Note: Placing the projector in this position keeps dust from getting inside the projector housing.
3.Use a screwdriver, coin, or similar object to loosen the retaining screw on the lamp cover. When the screw is loose, lift off the lamp cover. (You cannot remove this screw from the cover.)
2
1
Replacing the Lamp | 113 |