4.Use a screwdriver, coin, or similar object to loosen the two screws holding the lamp assembly in position. (You cannot remove these screws.)
2
1
✦Caution: Do not touch the glass portion of the lamp assembly; this can cause premature lamp failure.
5.Lift up the handle and pull out the lamp assembly.
6.Gently insert the new lamp assembly by lowering it into position. Make sure it’s inserted securely. Tighten the screws on the new lamp assembly.
7.Replace the lamp cover and tighten the cover screw. (Make sure the lamp cover is securely fastened. The projector will not run if the lamp cover is open.)
114 | 5 • Maintenance |