Before beginning, turn off the projector and video source if they are on.

1.Locate the appropriate video cable. If your video source uses a small, round, one-prong composite (RCA) video connector, you’ll need the audio/video (A/V) cable that comes with the projector. If your video source uses a large, round, four-prong S-Video connector, you will need to purchase the appropriate cable or use the cable that came with your video source.

2.For composite video, connect the yellow RCA plug on one end of the audio/video cable to the projector’s Video In jack. Connect the other yellow RCA plug to the video-out jack of your video source.

L Audio

 

 

Video In port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

audio/video cable

R Audio

Connect the other plugs on the audio/video cable to the Audio jacks of the projector: insert the white plug into the L jack and the red plug into the R jack. Connect the plugs at the other end of the audio/video cable to the audio output jacks of the video source.

36

1 • Installation