3. Connect the audio cable, if needed.
Audio In jack
audio cable
a.Connect one end of the audio cable to the Audio In jack on the projector.
b.Connect the other end of the audio cable to the Audio Out port on your computer.
4.If you are using the optional ELP Link III software, see Chapter 4 for instructions for connecting the Link cables.
Note: After you turn on the projector and computer, you may need to choose Mirroring in the Display Control Panel to display the image on the LCD screen as well as the projector screen. See your Macintosh documentation for details. (This step is not necessary on some newer systems, which can detect a dual video signal.)
34 | 1 • Installation |