a.Disconnect your Macintosh’s mouse cable. Connect the small end of the projector’s Mac mouse cable to the Mouse port on your Macintosh.
b.Connect the other end of the Mac mouse cable to the projector’s Mouse/Com port.
3.Connect the audio cable if needed.
Audio In jack
audio cable
a.Connect one end of the audio cable to the Audio In jack on the projector.
b.Connect the other end of the audio cable to the Audio Out port on your computer.
4.If you are using the optional ELP Link III software, see Chapter 4 for instructions for connecting the Link cables.
30 | 1 • Installation |