c.To also view the video on the computer monitor, connect the monitor cable to the projector’s Computer Out port. This is useful when you need to view the video output but the projection screen is behind you.
d.Tighten the screws on all connectors.
2.If you want to use the remote control as a mouse pointer for the computer, connect the mouse cable.
Note: If you’ll be using the optional ELP Link III software, skip step 2, as you’ll need to connect the mouse cable included in the ELP Link III set instead. Follow the instructions on page 78 to connect the mouse cable.
Mouse/Com port
PS/2 mouse cable
a.Disconnect the computer’s PS/2 mouse cable from the mouse port on the back of your computer and replace it with the small end of the PS/2 mouse cable included with the projector.
22 | 1 • Installation |