3.Follow the instructions in “Printing Your Design” on page 56 to make sure your EPSON Stylus Photo 900 is selected, and the Paper Source is set to Manual or
Manual Feed.
4.Select Print from the File menu, or click the 
Print button. You see this screen:
Windows | Macintosh |
Select this setting
5.Select Print Position Confirmation (or Check) Pattern and click OK
(Windows) or Print (Macintosh). The confirmation pattern is printed on the check disk or CD.
6.Remove the check disk or CD and measure the distance from the edge of the hole to the small cross marks (distances labeled A and B as shown). You’ll need a millimeter ruler for these measurements.
58 Printing on CDs and Special Media