7.Set the paper thickness lever to the 
position. (If the print quality is not satisfactory, try setting the paper thickness lever to the 
position for the next print.)
If you’re using the manual feed slot to print on paper rather than card stock, set the paper thickness lever to the 
position.
8.Close the printer cover and press the 
button to feed the card stock into the printer.
Note: If the 
paper light flashes, make sure the paper thickness lever is set correctly, then press the 
button again.
9.Before you print, make sure you select Manual or Manual Feed as the paper source in your printer software (see “Printing in Windows” on page 21 or “Printing on a Macintosh” on page 31).
When you’re finished printing on card stock, make sure you return the paper thickness lever to the 
position.
Caution: Don’t move the paper thickness lever during printing; this could damage your printer.
Printing on CDs and Special Media 71