5.Click Next. You see a window like this:

6.In the Printer Name or IP Address box, enter the print server’s name (if you’re connecting using DHCP) or IP address (if you’re connecting in Static Mode). Then click Next.

7.Follow the instructions on the screen to complete the wizard.

8.Click Close to close the Printer Ports window, then click Apply on the Properties window.

9.To test the connection, select the General tab and click Print Test Page. If the test page prints, click OK to close the Properties window.

If it fails to print, try the following:

■Make sure that the printer and print server are connected, plugged in, and turned on.

■Check the printer to see if a red light is on or flashing, indicating that paper or ink is out, or paper is jammed. See Printer Basics for details.

■Check WP-Admin to make sure you have a signal (see page 24).

■Make sure you’ve entered the correct name or IP address in step 6.

■Make sure you clicked Apply in step 8.

Now you’re ready to start printing. For instructions, see Printer Basics.

Setting Up a Network Port 29