4.On the Add Port window, make sure Network is selected, then click Browse. You see the Browse for Printer window:

5.Click the + next to Entire Network, then click the + next to Epson_lpr and select the Stylus C84 printer.

(Make sure the IP address matches your print server’s IP address.)

6.Click OK, then click OK again.

7.Click Apply on the Details tab.

8.To test the connection, click the General tab and click Print Test Page. Wait for the page to print.

If the test page prints, click Yes, then click OK to close the Properties window.

If it fails to print, try the following:

■Make sure the printer and print server are connected and both are turned on.

■Check the printer to see if a red light is on or flashing, indicating that paper or ink is out, or paper is jammed. See Printer Basics for details.

■Check WP-Admin to make sure you have a signal (see page 24).

■Make sure you selected the correct printer in step 5.

■Make sure you clicked Apply in step 7.

Now you’re ready to print. For instructions, see Printer Basics.

Setting Up a Network Port 31