■If your adapter does not include an 802.11b Ad Hoc option, set the wireless mode to Ad Hoc, Computer-to-Computer, or whatever mode your adapter uses to communicate without an access point. Do not select a pseudo ad hoc or proprietary ad hoc mode. See the documentation for your wireless adapter for details.

■If you’re using infrastructure mode, make sure there is a link with good signal strength (greater than 50 percent) between the Macintosh and base station or access point. See your wireless adapter’s documentation for details.

■If you’re configuring the print server from a Macintosh with a non-AirPort wireless adapter, make sure WEP (Wired Equivalent Privacy) is disabled before you begin. See the documentation for your wireless adapter for instructions.

Installing the C84WN Software

Your printer software CD-ROM includes the following software:

■EPSON Stylus C84WN printer driver

You must install the printer driver on every Macintosh that uses the EPSON Stylus C84WN printer. This software controls print settings, monitors printer status, and provides several utilities for printer maintenance. For instructions on using your printer driver, see the Printer Basics book.

■EpsonNet Wireless Print Server Utilities

This includes WP-Admin, which lets you configure the print server. You only need to install WP-Admin on one Macintosh on your network.

■EPSON Software Film Factory

This photo management program lets you organize, beautify, and print your photos in a flash.

■Printer Movies and User Guide (EPIC)

This program includes Print Show animated tutorials and a comprehensive User Guide for your printer.

■The print server also comes with a built-in web-based configuration utility. This lets you change configuration settings from any computer on the wireless network that supports a standard web browser. You must configure the print server using WP-Admin before you can use the utility.

Installing the C84WN Software 37