7.In most cases, you can leave the Boot Method set to Auto.

If you entered an IP address manually, set the Boot Method to STATIC.

8.If you want to use WEP encryption, do the following:

■Select 64BIT in the WEP key box.

■In the 64Bit Key 1 box, enter a hexadecimal value consisting of 10 digits, or a combination of digits and letters. Digits can be from 0 to 9, and letters must be between A and F. For example: 62B91F2A98.

Note:

You must make various changes to your AirPort network to use WEP encryption. For complete instructions, see page 50.

9. If you’re using an AirPort base station, set the Wireless Mode to Infrastructure.

10.Enter your network name in the SSID box.

11.Make any other changes you want and click OK. You see the Wireless Server Search window again:

12.Click QUIT.

Note:

You can change the print server’s configuration at any time. To start WP-Admin, double-click the WP-Admin alias on your desktop, if you’ve created one. You can also open the EpsonNet folder in the Utilities folder on your hard drive, then double-click the WP-Admin icon.

Continue with the instructions in the next two sections to set up your Macintosh to print to the Stylus C84WN.

Setting Up Your Macintosh to Print

Before you can print to the Stylus C84WN, you need to add it to Print Center or the Printer Setup Utility if you’re running Macintosh OS X, or select it in the Chooser, if you’re running Macintosh OS 8.6 to 9.x. Follow the instructions for your operating system.

42Installing and Configuring the Software for Macintosh