Safety Regulations
The printer PP 407 (CI - 4070) and PP 408 (CI - 4080) fulfils the safety regulations according to UL 1950 and VDE (IEC 950) and CNA/CSA 22.2 / No. 950 for computer systems.
The mains cable must be connected to a ground protected
The power plug must be easily accessible at any time so that it can be disconnected immediately in case of danger or for maintenance purposes. Comme le câble de secteur sert de dipositif
Before installing the printer, check the surrounding conditions in which the printer will be placed (see next page, Operating Environment and chapter 1).
During a thunderstorm you should never attempt to connect or disconnect any data transfer cables.
The power supply should only be opened and checked by authorized personnel. Repairs and maintenance beyond the descriptions of chapter 4 may only be attempted by authorized personnel as well. Repairs done inappropriately may cause damage and severe danger for the user.
There is a warning symbols to draw the user's attention to possible injuries:
This symbol is visible when the top cover has been opened. It indicates that the print head is extremely hot after long periods of printing.
Ce signal de danger se présente quand le cache supérieur de l'imprimante soit retiré pour indiquer que la tête d'impression peut être extrèmement chaude après imprimer très longtemps.
This symbol is located on the cover of the cutting device. It cautions against touching the blade (only CI - 4080).
Ce signal de danger se trouve sur le cache supérieur du massicot pour indiquer de ne pas toucher le couteau.
I
