Configuring the printer
SEmulation
The emulation determines the set of commands available for the printer (see Appendix D and E).
S EPSON LQ S IBM PROPR.
S IBM PROPR.AGM S EPSON LQ
Note: The selected Emulation will also be stored in the actual macro. With a
change of the macro (e.g. key , , or is pressed) it is possible that the emulation will also be changed. Be careful: Do not change the emulation within an application.
SCharacter Set
When selecting a character set it can be further specified by the corresponding national versions.
Detailed tables of the character sets can be found in Appendix B.
If a different macro is selected the default character set may change,
e.g. - IBM PROPR. emulation has the character set IBM SET 2 as default.
-EPSON emulation has the character set EPSON EXT.GCT as default.
SLine Mode
If LF = LF + CR is selected, the printer performs a carriage return (CR) for every line feed (LF) received via the interface.
If CR = LF + CR is selected, the printer performs a line feed (LF) for every carriage return (CR) received via the interface.
S$$ Commands
This function causes $$ either to be printed as $$ or to activate ESC commands within an application.
If this function is set to YES the characters are interpreted by the printer in the following way:
S $$ as ESC [ S $$/ as ESC.