Front/Top
The illustration shows the projector with a standard zoom lens installed.
Name Function
ALamp cover Open this cover when replacing the projector's lamp.
s p.97
BAir exhaust vent Exhaust vent for air used to cool the projector internally.
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust vent
and do not put your face or hands near the vent
while projection is in progress.
Name Function
CFront adjustable foot Extend and adjust the position of the projected image
when the projector is placed on a surface such as a desk.
s Quick Start Guide
DFoot adjust lever Pull out the foot lever to extend and retract the front foot.
s Quick Start Guide
EZoom ring Adjusts the image size. s Quick Start Guide
FProjection lens Images are projected through here.
GLens unit removal
button
Press this button to remove the lens unit when replacing
lens units. s p.133
HRemote receiver Receives signals from the remote control. s p.17
IFocus ring Adjusts the image focus. s Quick Start Guide
JAir filter tab When cleaning or replacing the air filter, use this tab to
pull out the air filter. s p.94, p.100
KStatus indicators The color of the indicators and whether they are flashing
or lit indicate the status of the projector. s p.80
LWireless LAN indicator This indicator shows the status of network access when the
Wireless LAN unit is installed. s p.135
MAir intake vent
(Air filter)
Takes in air to cool the projector internally. If dust collects
here it can cause the internal temperature to rise, and this
can lead to problems with operation and shorten the
optical engine's service life. Be sure to clean the air filter
regularly. s p.94
NVertical lens shift dial Turn the dial to move the position of the projected image
up or down. s p.20
OHorizontal lens shift
dial
Turn the dial to move the position of the projected image
left or right. s p.20
Part Names and Functions10