Epson EB-G5450WU

Check Remedy

Is Position adjusted correctly? Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic

adjustment when projecting the computer analog RGB signals. If the images are not adjusted correctly after using

automatic adjustment, you can make the adjustments using Position from the configuration menu.

Apart from computer analog RGB signals, you can adjust other signals while projecting by adjusting Position from the

configuration menu. s Signal Menu - Menu Position p.53

Is the computer set for dual display?

Only when projecting computer images

If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of the image on the

computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.

s Computer video driver documentation

Is the correct resolution selected?

Only when projecting computer images

Set the computer so that the signals being output are compatible with the projector.

s "Supported Monitor Displays" p.143 s Computer documentation

Image colors are not right

Check Remedy

Do the input signal settings match the signals from the connected

device?

Change the setting according to the signal for the connected equipment. s Signal Menu - Input Signal, Video Signal

p.53

Is the image Brightness set correctly? Adjust the Brightness setting from the configuration menu. s Image Menu - Brightness p.51

Are the cables connected correctly? Check that all the cables required for projection are securely connected. s p.126, p.128

Is Contrast

adjusted correctly? Adjust the Contrast setting from the configuration menu. s Image Menu - Contrast p.51

Is the Color Adjustment correctly? Adjust the Color Adjustment setting from the configuration men u. s Image Menu - Color Adjustment p.51

Are the Color Saturation and Tint adjusted correctly?

Only when projecting images from a video source

Adjust the Color Saturation and Tint settings from the configuration menu. s Image Menu - Color Saturation, Tint

p.51

Images appear dark

Check Remedy

Is the image Brightness set correctly? Adjust the Brightness and Power Consumption settings from the configuration menu.

s Image Menu - Brightness p.51 s Settings Menu - Power Consumption p.55

Is Contrast

adjusted correctly? Adjust the Contrast setting from the configuration menu.

s Image Menu - Contrast p.51

Problem Solving