When multiple projectors are lined up and projecting images, you can
manually correct the brightness and color tone of each projector's image so
that the colors projected from each projector match closely.
Use the multi-screen color adjustment function when the Color Mode of
each projector is set to the same item.
In some cases the brightness and color tone may not match completely
even after correction.
Summary of Correction Procedure
When multiple projectors are set up and you need to make corrections, use
the following procedure to correct one projector at a time.
1. Set the projector ID and the remote control ID.
To limit operation to one target projector, set a Projector ID for the target projector,
and set the same ID for the remote control. s p.38
2. Correct the color difference.
You can carry out color correction when projecting from multiple projectors. You
can adjust from black to white in five stages called levels 1 to 5, and in each of these 5
levels you can adjust the following two points.
•Correcting brightness
You can correct the image brightness to make them all equal.
•Correcting color
You can adjust the image color to make them match more closely by using
Color Correct. (G/R) and Color Correct. (B/Y).
Correction Method
After setting up the projectors, correct the brightness and tone for each
projector to reduce the differences.
Procedure
A
Press the [Menu] button and select Extended - "Multi-screen"
from the configuration menu. s "Using the Configuration
Menu" p.50
Using the Remote Control Using the Control panel
B
Select Lv. to be corrected in "Adjustment Level".
Color Correction when Projecting from Multiple Projectors (Multi-screen Color Adjustment)41