Nothing appears on the external monitor
Check Remedy
Are you trying to display an image from an input port other
than the Computer1 input port or the BNC input port?
Only RGB signals from the Computer1 input port or the BNC input port can be displayed on an external
monitor.
Are you projecting a split screen? Only RGB signals projected on the left screen from the Computer1 input port or the BNC input port can be
displayed on an external monitor. s p.30
I want to change the language for messages and menus
Check Remedy
Change the Language setting. Adjust the Language setting from the configuration menu. s Extended Menu - Language p.57
Mail is not received even if a problem occurs in the projector
Check Remedy
Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the configuration menu. s Extended Menu - Standby Mode p.57
Did a fatal abnormality occur and the projector come to a sudden
stop?
When the projector comes to a sudden stop, e-mail cannot be sent.
If the abnormal state continues, contact your local dealer or the nearest address provided in the Support and Service
Guide. s Epson Projector Contact List
Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.
Is Mail function set correctly in the configuration menu? Mail notification of problems is sent according to the Mail settings in the configuration menu. Check if it is set correctly.
s Network menu - Mail p.72
Problem Solving
91