Changing the video output from a laptop computer.
When projecting images from a laptop computer connected to the projector with a computer cable, the output for the video signal must sometimes be changed
at the computer. Refer to the documentation for your computer for the method to change the video output.
•Example of changing the output (Windows computers)
Hold down the [Fn] key on your computer and press the function key labeled CRT/LCD, , and so on. If the image is not displayed on your computer
monitor, press the same keys again.
Connecting to Video EquipmentThis section provides examples of connecting the projector to video equipment. The video equipment port and cable names may also be different from those
given.
Port on the video equipment Connecting cable Projector port
Connection 1 Component outputs RCA component video cable (commercially available) + BNC/RCA
adapter (commercially available)
BNC input port (R/Cr/Pr, G/Y, B/Cb/Pb)
Audio3 input port
Audio Out port Audio cable (commercially available)
Connection 2 Component outputs Component cable (D-sub/component conversion) (optional
accessory)
Computer1 input port
Audio1 input port
Connecting to Video Equipment
128