Whenever you are in the SETUP program, the bottom of the screen lists the keys you can press to perform specific functions.

Displaying System Information

The SETUP program provides a system information screen that lists the following:

Processor type

Coprocessor type (if you’ve installed a 486DX microprocessor upgrade)

Reserved memory

BIOS version number

Addresses for video mode, serial ports, and printer ports

Option ROMs (if any ROM exists on your installed option cards).

To see this information, press F2 from either of the SETUP screens.

Setting the Date and Time

The real-time clock in your computer continuously tracks the date and time-even when the computer is turned off. Once you set the System Time and System Date options using SETUP, you should not need to change them, unless you adjust the time for daylight savings or other seasonal adjustments. (The computer automatically changes the date for leap years.)

Use to move the cursor to the value you want to change. Then press + or - until you see the value you want.

Setting Up Your System

1-22