To move a jumper from one position to the other, use needle-nose pliers or tweezers to pull it off its pins and gently move it to the desired position.

Caution

Be careful not to bend the jumper pins or damage any components on the main system board.

4.Replace any option cards you removed. See page 3-14 for instructions.

Installing Memory Modules (SIMMs)

Your computer comes with 4MB of memory on a SIMM. By installing additional SIMMs, you can increase the amount of memory in your computer up to 32MB.

There are two SIMM sockets on the main system board, and each can contain one memory module. You can install lMB, 4MB, 8MB, and 16MB SIMMs. The following table shows the possible SIMM configurations; do not install memory in any other configuration.

SIMM configuration

3-10 Installing and Removing Options