Using Other Shadow Options
Eight additional shadow options are available, allowing you to shadow 16KB at the memory address listed on the screen. You may want to enable one or more of these shadow options if you are using option cards that contain ROM. Using these options, you can shadow the memory on the card to your system’s RAM or external cache (if one is installed). Check the documentation that came with your option card to determine which addresses your option card can access. You may also need to set some switches or jumpers on your option card.
If you enable the Memory Remapping option, you cannot enable the last four of these Shadow options because they access the same memory addresses.
Exiting the SETUP Program
When you leave the SETUP program, you can save your settings and reboot your system, or exit SETUP without saving your settings. You can also return all values to the factory defaults.
To leave the SETUP program, press ESC from any SETUP screen. From the SETUP exit menu, press these keys to perform the following functions:
Esc Returns to the SETUP utility
F4 Saves the changes you have made to your configuration and restarts your computer
F5 Supplies the factory default values for all SETUP options
F6 Exits the SETUP utility and returns to the system prompt without saving any changes.