Connecting to a Projector or Monitor

You can connect the document camera to any projector or monitor that has a standard RGB video, composite video, or S-Video input port. EPSON projectors support all three connections. Most computer monitors support only RGB video, while many television monitors support S-Video and composite video.

RGB video provides the highest quality, with true XGA resolution. S-Video offers the next best quality, followed by composite video.

Connecting the RGB Video Cable

Before you start, make sure your document camera and projector or monitor are turned off.

1.Connect one end of the RGB video cable to the document camera’s RGB OUT port.

2.Connect the other end of the RGB video cable to RGB video input port on the projector or monitor.

or

note

The RGB video input port on the projector or monitor may be labeled computer, component video, or video in.

3. Tighten the screws on the connectors.

Setting Up the Document Camera 11