Adjusting the Image Position and Size

If you are displaying a

Remote control

computer image using the

 

Video or S-Video output

 

port, you can adjust its

 

position and size.

 

To adjust the image position, use the Position arrow buttons on the remote control.

Position arrow buttons

note

You can’t adjust the position or size of an image captured with the overhead camera or an image output through the RGB video output port.

To adjust the image size, press and hold the Main

button on the control panel.

Then use the right and/or down Position arrow buttons on the remote control to enlarge the image. Use the up and/or left Position arrow buttons to reduce the image.

Control panel

Main

The document camera will remember the position and size. If the signal frequency of the RGB1 or RGB2 port changes, however, you may need to readjust the position.

Using the Document Camera 21