Epson ELPDC02 Switching Between Picture Sources

What To Do If You See a Blank Screen

If an image doesn’t appear, try the following:

■Make sure the cables are connected correctly, as described on page 11 for a projector or monitor or page 14 for a computer.

■Make sure everything is turned on.

■Make sure the Main and Upper lights on the control panel and the upper lamps are on.

■If you are using a video source, such as a laptop or desktop computer, you may need to switch video sources. See the next section for instructions.

■If an image still doesn’t appear, refer to Chapter 4 for more help.

Switching Between Picture Sources

Remote control

If you have external video sources connected to the document camera, such as a laptop or desktop computer, you can switch between them and the camera. Press the RGB1 or RGB2 button on the control panel or remote control to switch to the desired video source. Press the Main button to switch back to the camera.

Control panel

RGB1

RGB2 Main

Main RGB1 RGB2

18Using the Document Camera