Adjusting the Image
Once you see your image, you may need to make certain adjustments:
■To zoom or focus your image, see the next section.
■If the image is too high or too low, you can reposition it. If the image is too large or too small, you can resize it. See page 21.
■If the image is too light or dark, see page 22.
note
The auto focus function works up to a height of approximately 3.9 in.
(10 cm) above the stage surface.
Remote control
Tele Wide Near Auto Focus
Zooming and Focusing Your Image
Use the Tele button on the control panel or remote control to enlarge the image, and use the Wide button to reduce it. The document camera will automatically focus the image.
If you change items on the stage, press the Auto Focus button to focus the image. The indicator light flashes until the image is focused.
The following objects may not focus well using the auto focus feature:
■Objects with little contrast
■Objects with a bright background or excessive contrast
■Objects with fine repeated patterns or stripes
■Objects that glitter or reflect bright light
■Objects with varying depths of field
To manually focus these objects, use the Near or Far button.
Control panel | Tele | Wide |
Far
Near | Far | Auto Focus |
20Using the Document Camera