20
Playing Sound from the Computer
The projector has a single built-in speaker with a maximum output of 1 W. If
the computer that is connected to the projector has an audio output port, you
can output sound from the computer through the projector's speaker by
connecting the computer's audio output port and the Audio-In port (stereo mini
jack) on the rear of the projector using a stereo mini jack audio cable
(commercially-available). It is recommended that you use an audio cable with a
3.5 mm diameter stereo mini jack.
Use the following procedure to adjust the volume of the sound output.
Procedure
1
Press the [Menu] button on the
remote control, and then select
"Volume" from the "Audio"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.56)
2
Use the [ ] and [ ] buttons to
adjust the volume.
The volume is increased or reduced
each time a button is pressed.
3
After making the adjustment, press the [Menu] button to exit
the configuration menu.
Stereo mini jack audio cable
(commercially-available)
To audio output port To Audio-In port
+
-
+
-
Video
Audio
Setting
User's Logo
Advanced
About
: Select: Return : Adjust
Reset All
Volume
Tone
:
:
Reset
Execute
10
0
+
-
+
-
Video
Audio
Setting
User's Logo
Advanced
About
: Select: Return : Adjust
Reset All
Volume
Tone
:
:
Reset
Execute
15
0
Connecting to a Computer