69
Images appear greenish.No sound can be heard.The remote control does not work•Do the settings for component video input signals
match the signals from the connected device?
If the "Input Signal" command in the "Video" menu is set
to "RGB" when a component video signal source is
connected to the projector, the images will appear greenish.
Select the correct signal format for the connected source.
"Video" - "Input Signal" (p.49)
•Is the audio source connected correctly?
(p.20, 26)
•Has the volume been adjusted to the minimum
setting?
(p.50)
•Is A/V Mute mode active?
The projector may be in A/V Mute mode. Press the [A/V
Mute] button on the remote control to cancel the A/V Mute.
(p.42)
•Is the remote control light-emitting area facing
towards the remote control light-receiving area when
it is operated?
The operating angle for the remote control is
approximately 30º horizontally and approximately 15º
vertically.
•Is the remote control too far from the projector?
The operating distance for the remote control is
approximately 6 m (20 ft.). (p.13)
•Is direct sunlight or strong light from fluorescent
lamps shining onto the remote control light-receiving
area?
•Has the battery insulating tape been removed?
(p.12)
•Is there battery in the remote control?
(p.74)
•Is the battery dead?
•Has the battery been inserted co rrectly?
(p.74)
Menu A/V Mute
E-Zoom
Freeze
Page upPage down
Power
ESCAuto
Enter
S-Video/Video
Color Mode
Computer