81
5
Select "Yes" at the confirmation
screen, and then press the [Enter]
button.
6
Select the zoom rate in the Zoom
rate setting screen, and then press
the [Enter] button.
7
Select "Yes" at the confirmation
screen, and then press the [Enter]
button.
The image will then be saved. Once the
image has been saved, the message
"Saving the user's logo is completed." will
be displayed.
Tip :
• Saving the user's logo may take a few moments (about 15 seconds). Do not use the
projector or any other sources which are connected to the projector while the user's
logo is being saved, otherwise it may result in errors in projector operation.
• User's logos can be saved at up to 480 x 360 dots in size.
• If the image resolution is not XGA , or if a video image is being projected, the display
size will be changed.
• Once a user's logo has been saved, the logo setting cannot be returned to the factory
default.
Do you use this image?
YES NO
User's Logo
: Select: Return : Execute
Set the zoom rate.
Zoom rate:
100% 200% 300%
User's Logo
: Select: Return : Execute
Do you save the user's logo?
If you save it, the previous user's
logo will be over written.
YES NO
User's Logo
: Select: Return : Execute