53
Color
Adjustment
Adjusts the colour temperature and intensity of each
RGB color for each input source.
•Color Temp.: Lets you adjust bright colours within a
range from reddish tinges to bluish tinges.
If the colour temperature is lower, colours
appear reddish and color tones appear
softer.
If the colour temperature is higher, colours
appear bluish and colour tones appear
sharper.
Press the [Enter] button and make the
adjustment in the colour adjustment sub-
menu that appears.
•RGB : Sets the colour intensity for each RGB
(red/green/blue) colour in the image.
Press the [Enter] button, select "R" (red),
"G" (green) or "B" (blue) and make the
adjustment in the colour adjustment sub-
menu that appears.
(This item cannot be selected if "sRGB" has been
selected as the "Color Mode" setting in the "Video"
menu.)
Color
Temp. :
Depends on
connection
Rear Proj. Use when projecting images from behind a translucent
screen.
When set to "ON", the projected images are horizontally
reversed.
OFF
Ceiling Use when installing the projector to a ceiling. When set
to "ON", the projected images are horizontally and
vertically reversed.
OFF
Link21L Sets whether the "EMP Link21L " utility software is
being used or not.
After changing the setting, turn off the projector's power.
After the cool-down has finished, turn the power back
on. The EMP Link21L software can then be used.
See "Utility Software" in the Safety Instructions/World–
Wide Warranty Terms.
OFF
Reset Resets all adjustment values for the "Advanced" menu
functions except for the "Language" setting to their
default settings.
•Press the [Enter] button to display the confirmation
screen, and select "Yes".
•Select "Reset All" to return all menu settings including
settings for the "Video" and "Audio" menus to their
default settings. (p.55)
-
Sub-menu Function Default