51
Auto
Keystone
Sets the function for automatically correcting keystone
distortion when the angle of the projector has been
adjusted to ON or OFF. This function is only enabled
when the "Rear Proj. " and "Ceiling" commands in the
"Advanced" menu are set to "OFF". If either "Rear Proj. "
or "Ceiling" is set to "ON", this menu cannot be selected.
ON
No-Signal
Msg.
Sets the message status and background colour at times
such as when no image signal is being input.
When set to "OFF", the background colour becomes
black and no message is displayed.
•To change the user's logo, you need to record and set
your own logo. (p.80)
Blue
Prompt Sets whether the input signal name is displayed on the
screen or not when the input signal is changed.
ON
Color Mode
Prompt
Sets whether the colour mode prompt is displayed on the
screen or not when the colour mode is changed.
ON
A/V Mute Sets the screen status when the [A/V Mute] button on the
remote control is pressed.
•To change the user's logo, you need to record and set
your own logo.
Black
Sleep Mode Sets the energy saving operation when no signal is being
input.
•When set to "ON", projection stops automatically and
then after the cool-down period is finished, the
projector changes to sleep mode if no operations are
carried out for 30 minutes while the "No-Signal."
message is being displayed. (The Power indicator lights
orange.)
•Projection starts again when the [Power] button on the
projector's control panel or the remote c ontrol is
pressed.
ON
Reset Resets all adjustment values for the "Setting" menu
functions to their default settings.
•Press the [Enter] button to display the confirmation
screen, and select "Yes".
•Select "Reset All" to return all menu settings–including
settings for the "Video" and "Audio" menus–to their
default settings. (p.55)
-
Sub-menu Function Default