28 - Connecting the projector to a computer

In the case of the mini D-Sub 15 pin
·Connect the computer’s monitor port to the Computer #1 mini D-Sub 15 Port on the projector
with the computer cable supplied.
·Set the switch to the analog setting (left-hand side) with the tip of a ballpoint pen or other
pointed object.

● When the monitor port is the D-Sub 15 pin

Caution
·Switch off the power supply to the projector and computer before attempting to make the con-
nection. Failure to observe this may result in damage.
·Confirm the shape of the cable connector and the shape of the port before making the connec-
tion. Applying excessive force when the direction or shape of the connector and port differ may
result in defects and damage to the equipment.
Computer #1 mini D-Sub15 Port
Computer Cable
(supplied with the projector)
Monitor port
(video port)