34 - Connecting the projector to a computer

Connecting the mouse (wireless mouse function)
This enables the computer’s mouse pointer to be operated with the remote control in the same
way as a wireless mouse.
Connect the computer's mouse port to the projectors Mouse #1/2 ports with the use of a mouse
cable. Use the Mouse #1 port when the Computer #1 port has been connected, and the Mouse
#2 port when the Computer #2 port has been connected.
Point
·Only the USB standard mounted model supports USB Mouse Cable connections. In the
case of Windows, only the Windows 98/2000 preinstalled model is supported. Operations
cannot be guaranteed on upgraded Windows 98/2000 environments.
·Only a computer mouse connected to the mouse/com port can be used.
·There are cases where the computer must be set up to use a mouse. Refer to the instruc-
tion manual for the computer for further details..
·Switch off the power to the projector and computer before making the connection.
·It is necessary to reboot the computer if it does not work.
·Consult with your vendor if you wish to use a serial mouse, or an ADB mouse on a Macin-
tosh.
Computer Mouse to use Mouse cable to use
PC/AT
DOS/V
PS/2 mouse PS/2 mouse cable (supplied)
USB mouse USB mouse cable (supplied)
Macintosh USB mouse USB mouse cable (supplied)
Mouse #1/2 portsPS/2 connection
Mouse port
Mouse cable (refer to the above table and
select the cable supplied with the projector .)