70 - Menu Operations

· The image menu and information displayed will differ in accordance with the projected input

source, and Menus other than that belonging to the projected input source cannot be adjusted.

·The information menu displays the status of the input source settings being projected.

Advanced Comp2Sync Ter-
mination
Sets the Computer #2 termination mode to enable image
processing from a Port.
On: Terminated in analog (75Ω)
OFF: TTL input
·Usually use d at [OFF ]. Set at on with t he switc her when
analog 75Ω termination is required.
OFF
Rear Proj. Set at [ON] to project images onto a half-transparent
screen from the rear. The projected image will be
inverted.
OFF
Ceiling Set at [ON] to project images when suspended from the
ceiling. The projected image can be be inverted from left
to right and up and down.
·The optional ceiling suspension unit is required to
suspend the projector from the ceiling. (see page89)
OFF
Reset Returns all advanced setting menu adjustment values to
the default values.
Press the [Enter] button and then select [Yes] on the con-
firmation screen displayed.
·Select [Reset All] to return all image and sound values
to the default settings.
-
About (Displays the current settings) -
Reset All Execute Returns all items in the set-up menus to the default val-
ues.
Press the [Enter] button and then select [Yes] on the con-
firmation screen displayed.
·Execute the [Reset] function from each individual sub
menu to return the image and sound settings to the
default values for each menu.
·The user logo, lamp time, language and BNC settings
will not be returned to the default values. Perform the
reset procedure after the lamp has been replaced. (see
page86)
-
Top Menu Sub Menu Functio n Default Value