50 - Picture Quality Adjustment

Tracking adjustments (when projecting computer images)

Adjusted when vertical stripes are apparent on the computer image.
1Press the [Tracking +, -] button on the projector.

Synchronization adjustments (when projecting computer

images)

Adjusted when flashing, blurring and vertical noise are apparent on the computer image.
1Press the [Sync +, -] button on the projector.

Calling out adjustment values

(when projecting computer images)

It is possible to record preset adjustment values and call them out when required.
1Press the [Preset] button on the remote control.
The pre-registered numbers between preset #1 and preset #5 will change in sequence
whenever this button is pressed.
Point
·There are cases when these adjustments must be made again if the values output from
the computer (resolution, display color) are amended after flashing and blurring have
been adjusted.
·There are cases where flashing and blurring is caused by adjusting the brightness and
contrast*.
·Images will be projected more vividly if synchronization adjustments are made after the
tracking adjustments.
·Auto adjustments, tracking adjustments and synchronization adjustments are not possible
if no image signals are being input by the computer, such as when projecting video
images.
·The preset values must be registered beforehand. (see page66)
Video
Computer
A/V mute
Resize
Esc Help
Menu
Tracking Tracking
Sync
Sync
Shift
Keystone
Volume
Power
Video
Computer
A/V mute
Resize
Esc Help
Menu
Tracking Tracking
Sync
Sync
Shift
Keystone
Volume
Power
Esc
Menu
Comp1
P in P Preset
Video
Help
- Volume + Preset
Comp2/YCbCr
Auto Resize