Connecting video equipment - 37

In the case of component (color differential*) image signals
·Connect the projector’s Computer 2/Component Video Port to the video equipment with the
component image cable (available on the open market) so that the following table is sup-
ported.
·Connect the L-Audio-R (S-Video/BNC) ports with the RCA audio cable supplied (red/white)
to output sound from the projector's speakers.
Point
·A conversion connector (available on the open market) is required on the projector's BNC
port when a component image cable is connected. Align the video with the equipment
port.
·Set the BNC parameter on the menu to [YCbCr] or [YPbPr], as appropriate for the input
signal being used, when the connection has been established. (see page 68)
Video equipment R-Y(Cr) Y B-Y(Cb)
Projector R/Cr/Pr G/Y B/Cb/Pb
R/Cr/Pr Port
G/Y Port
Audio Port L (White
)
Audio Port R (Red)
To the R-Y (Cr) output port
To the Y output port
To the B-Y (Cb) output port
RCA Audio Cable
(supplied with the projector)
For component images Cable (available on the open market)
To the audio output port L
(white)
To the au dio ou tput p ort R
(red)
B/Cb/Pb Port
Conversion
connectors (three,
available on the
open market)